RINOL DensiSod is a water based solution that hardens and seals the pores in concrete floors. It penetrates and reacts in the surface strengthening its properties and providing a dustproof floor. The chemical reaction produces a more abrasion resistant surface which is also easier to clean and maintain.

USES

RINOL DensiSod is used to increase the resistance and tightness of concrete surfaces. RINOL DensiSod enhances the performance of concrete surfaces which results in higher gloss levels after regular wet cleaning. Also it increases abrasion resistance and tensile bond strength of poor concrete surfaces.

CHARACTERISTICS

Ready to use
Easy to use
Increases the chemical and mechanical properties compared to untreated concrete
Reduces the dusting of concrete floors
Regulates water loss in fresh concrete during the curing process
Improves cleanability of concrete floors
Colorless, non-yellowing
Deep penetration
Solvent free
Odorless
Environmentally friendly

RINOL DensiSod superficially penetrates 3-5 mm deep into the porous substrates, creating a chemical reaction that increases the hardness, density and mechanical resistance of concrete, cement pastes and monolithic slabs.

TECHNICAL DATA

Appearance: clear, colorless liquid
Operating temperature: 5 °C to 45 °C
Consumption: 70-100 ml/m²*

*Depending on the porosity and absorbency of the surface.